Melco G3 Support

Tools needed for installation: 2.5mm Metric Hex Driver 3mm Metric Hex Driver Needed Parts: Sleeve Table Adapter Plate Two (2)...

Tools needed for installation: 2.5mm Metric Hex Driver 3mm Metric Hex Driver Needed Parts: Small Table Adapter Plate Two (2)...

Tools needed for installation: 2.5mm Metric Hex Driver 3mm Metric Hex Driver Needed Parts: Polo Table Four (4) M4 Countersunk...

Tools needed for installation: 2.5mm Metric Hex Driver 3mm Metric Hex Driver Needed Parts: T-Shirt Table, Universal Four (4) M4...

Every six months, the condition of the valves and openings on the bulk ink cartridges must be inspected and possibly...

This maintenance should be performed once per week, ideally at the end of the work week or whenever the printer...

This maintenance should be performed once per week, ideally at the end of the work week or whenever the printer...

This basic maintenance has to be performed at the end of every day to appropriately shut down the printer. Press...

Every day before using the printer, you must remove and shake the cartridges. This will agitate the ink and reverse...

Power cleans may need to be commanded for the following reasons. to clear a clogged nozzle in the case of...

Nozzle checks are performed to check the performance of the print head nozzles. To perform a nozzle check: Move the...

Initial Powering Up of the Printer Caution! Before powering up the printer, make sure that: All safety/shipping fixtures have been...

Cable Connections Power Supply (220V-240V)* socket Network (Ethernet-LAN) connection socket USB connection socket (used for printing) USB connection socket (used...

Caution - The maintenance tank must be reset before the ink level drops below 20%. It is recommended to reset the...

The Melco G3 uses refillable 160ml cartridges. These cartridges will need to be filled with the appropriate ink prior to...