Load a design on the standard control panel

Insert the design disk into the floppy disk drive. The floppy disk drive is located on the right side of the control panel.

Press the EMB.CALL button or (IN-OUT button)

Press the green DOWN button on the LCD menu indication screen to access the FDD CALL command.

Press the SET button. The machine will display all of the designs located on the floppy disk.

Scroll to the desired design name by using the green UP or DOWN button on the LCD menu indication screen.

Press the SET button. The line SELECT EMPTY ROOM will appear on the screen followed by a number. Unless a change is necessary, press the SET button.