M2 DEFAULT SETTINGS:
3.5.4 Confirming Default Settings
This section gives an overview of the Setup Menu and the M series default settings.
There are some critical M series default settings that ensure that the printer operates in accordance with the M series specifications. If these settings are not set at the correct value, the printer will not behave correctly.
22.214.171.124 Enter the Setup Menu
When the printer is in “normal” mode, press the [Menu\ key
The operation panel will shift to the setup menu display and show
"*Menu* TestPlot> ".
126.96.36.199 Return to Normal Display
While the plotter is in setup menu display, if either of the following operation is done, the operation panel shifts to Normal display
[Menu] key on the operation panel is pressed.
In the Setup menu, leave the keys untouched for three minutes.
188.8.131.52 Menu Setup Procedure
Follow the following procedure to configure various setup menus.
Check that the operation panel is Normal (Display will read
Ready to Plotor
End of Roll).
Press the [Menu] key on the operation panel.
"*Menu* TestPlot> ".will be displayed on the operation panel.
The setup menu display will be displayed.
Press the [Back] key or [Next] key on the operation panel to select a setup item and press the [Enter] key.
The settings will be confirmed.
When setup item has a submenu, the submenu will be displayed.
If a submenu item displayed on the LCD monitor of the operation panel is blinking, it’s setting can be changed. Press the [Forward] key or [Reverse] key to change the setting.
To save the changed setting, press the [Enter] key on the operation panel.
The setting will be saved and the next setup item will be displayed.
Press the [Menu] key or [Cancel] key on the operation panel to exit from the setup.
The previous setup menu will be displayed.
When the main menu is displayed, the screen turns to Normal.
184.108.40.206 Setup Menu Structure
The setup menu has the following items.
<> parts in each list are initial settings
[ ] parts in each list are M series default settings (if different from initial settings).