Download the DTG M2 Service Manual

DTG M2 M4 Support

Download the DTG M2 Service Manual

1 comment

Download the DTG M2 Service Manual here.

DTG M2 Error List

              

Replacing the WIMS Filter

1 comment

The filter used in the WIMS system is a consumable, disposable item, and should be replaced at least once per month – more frequently during periods of high white ink consumption. Disconnect power to the WIMS unit so that the white ink is not circulating. Carefully disconnect the luer connectors...

DTG M2 Replacing the Long Cables

Learn how to replace the long head cables on your DTG M2 Garment Printer.  You can buy the DTG M2 Long Cables here

M2 CS Series

All training videos for the older C engine M2’s are located at the below Youtube Playlist. These videos are not applicable for the new X engine M2 printers. To identify which printer you have, turn the printer on and look for the message “Paper End” or “Cover Open” on the...

VIDEO - Improper Pretreat for Printing on Darks on the DTG M2 Garment Printer

Learn different ways to pretreat your garment for Dark shirt printing on the DTG M2.  Pretreating by hand is not easy, it is reccomended to Buy Automatic Pretreatment Machines for the DTG M2 Garment Printer Here!

VIDEO - Replacing the Print Head on the DTG M2 Garment Printer

 Learn how to install the DTG M2 print head on your DTG M2 and M4 Garment Printer.  If you need a print head Buy a Print head for the DTG M2 Garment Printer Here!

Clean the Encoder Strip on the DTG M-Series

Note - No tools are required for this procedure. Use protective gloves to avoid stained fingers. The microfiber cloth (from maintenance kit) will be required for this process. The Encoder Strip is the thin plastic strip that runs behind the Print Head for the length of the carriage area. It looks to...

VIDEO - Flushing the DTG M2 Garment Printer

1 comment

Learn how to properly flush your DTG M2 and M4 Garment Printer.  Keeping it clean for storage or while on vacation is super important.  If the printer is to be left idle for a long period of time (1 – 2 weeks), then you should flush the system with flushing...

VIDEO - End of Day Maintenance on the DTG M2 Garment Printer

 Understanding maintenance on an y garment printer is important, learn how to maintain and clean your DTG M2 and M4 Garment printer.  If you need cleaning solution Buy Cleaning Soultion for the DTG M2 Garment Printer Here!

VIDEO - Printing a White Shirt on the DTG M2 Garment Printer

 Printing on white shirts is easy with the DTG M2 and M4 Garment printer.  Using the right CMYK is is crucial, Buy a Full Liter Cmyk Set SPECIAL for the DTG M2 Garment Printer Here!

VIDEO - Printing A Black Shirt using White Ink on the DTG M2 Garment Printer

Printing on dark shirts with any garment printer can be a challenge, however having the right ink makes is much easier.  If you need DuPont ink Buy White Ink for the DTG M2 Garment Printer Here!  

VIDEO - Installation Update and Understanding RIP Pro C6 on the DTG M2 Garment Printer

The RIP for the DTG M2 is different than what they use to sell for the DTG HM1 and VIPER, but you can still Buy the RIP Programs for older DTG's Garment Printer Here!  

VIDEO - Pretreating Light Polyester on the DTG M2 Garment Printer

Polyester is a breeze with the IMAGE ARMOR light shirt pretreatment.  If you want to shop for all the different pretreatments available Buy Pre-Treatment for the DTG M2 Garment Printer Here!

VIDEO - Pretreating Dark Cottons on the DTG M2 Garment Printer

Another great video on pretreating dark cottons for printing white ink.  First you need to Buy Dark Shirt Pretreatment for the DTG M2 Garment Printer Here!  

VIDEO - Pretreating Light Cottons on the DTG M2 Garment Printer

Pretreating with light pretreatment is different than with Dark Pretreatment.  It goes on much lighter.  Buy Light Shirt Pretreatment for the DTG M2 Garment Printer Here!

Garment Printing Support

More