Replacing the Cutter in your DTF Printer

When the cutter blade becomes dull, replace with a new cutter.

CAUTION: 

• Do not push the knob of cutter or release suddenly. There is a spring under the cutter, so the cutter can jump out.
• Do not touch the cutter blade, it may cause an injury.

Steps

1. Open the front cover of the printer.
2. Move the cutter holder a little so that the cutter can be removed. While pushing down the cutter knob lightly, move the cutter holder to your side.
3. Remove the cutter.
4. Attach a new cutter. Set the cutter holder to be in the original position.
5. Close the front cover of the printer.