DTG Viper Support

When installing a new motherboard/mainboard in your 4880 based garment printer, you will need to use the Epson 4880 Adjustment PRogram to pull the data off the EPROM and upload it to the new board. Unfortunately we can not offer any guidance on this, however if you do it and...

The 1001D error is normally generated on an Epson 4880 printer because the carriage motor is reporting an incorrect voltage being applied to the motor. There are several instances that can cause this. If the print head carriage assembly is obstructed in some way (problem with capping assembly possibly) it...

Learn how to replace the belt on the conveyer belt for the DTG Viper Garment Printer Printing Bed Buy the PF BELT for your DTG Viper here  

Buy your DTG Viper 2 Parts Here

This is a video showing you how to replace the PF encoder belt on the DTG Viper.

Replacing the Dampers on Epson 4880 Garment Printer, like the DTG Viper, Neofles, Melco G2, Freejet and many others.  This Video will help you do this repair yourself and save you money.....and best of all, get you printing again.

Epson 4880 Capping Station Replacement For the DTG Viper Buy the Capping Station for the DTG Viper and other Epson 4880 based garment printer   Tools Required: #2 Phillips Screwdriver, Needlenose Pliers  Download the Viper Capping Station Replacement PDF or view it here online.  1) Removal of the Blue Cover:...

Replacing the Printhead on the Epson 4880 Garment Printer Like the DTG Viper  Download the PDF or use this online version  Tools Required: #1 Phillips screwdriver, Tape (gaer’s or masking,not duct) 1) Release the carriage from the capping station. Bring the carriage close to the center of the machine. Fig.1...