E-Zee Tear® Plus – Soft 1.8 oz. is a heavy weight Tear Away stabilizer. Residual excess stabilizer left after tearing it away has a softer feel against the skin. Use for medium to high stitch count designs with medium to heavy weight woven fabrics. Tear Away stabilizers should be used with stable, non-stretchy fabrics.
How to use Tear Away Stabilizers
Cut a piece from a roll or use a piece of pre-cut E-Zee Tear ® Plus-Soft to fit your hoop size. Hoop by placing the stabilizer underneath the garment. Embroider the design and remove the embroidered item from the hoop. Carefully tear the excess stabilizer away to avoid excess pressure on the design.
When removing E-Zee Tear®, begin by pulling the excess from where there are points, such as corners or thin columns. Tear from the outer edge in towards the design, which will produce a minimum amount of pressure and the least amount of distortion to the design.
We're here to assist you with all your garment printing needs. Reach out to our dedicated team during our office hours, and we'll ensure you get the support you need.
Monday to Friday: 9:00 AM - 5:00 PM
For general inquiries, you can contact us through the following:
Address: 375 Oser Ave, Hauppauge, NY 11788