Image Armor PLATINUM Dark Shirt Pretreatment

Image Armor SKU: IAPlatinumPretreat1liter

$16.99

Earn [points_amount] when you buy this item.

4.5 / 5.0 based on 2 reviews
Size: Liter

image armor platinum solution for direct to garment printing

The latest formula from Image Armor is the new PLATINUM direct to garment pretreatment.

 

What is Image Armor PLATINUM?

  1. Uses less pretreatment per job than any other product on the market
  2. Brighter colors as a result of smoother white ink deposits
  3. Softer garment texture where pretreatment is used
  4. No mixing required – Ready To Use right out of the bottle.
  5. Wash durability is increased in DTG prints when properly cured 

 

Works great with Brother® , Epson® and modified Dupont® white ink sets.

Pretreatment Consumption Numbers - How long will a gallon last?
 

APPLICATION AND USE INSTRUCTIONS for PLATINUM

Before Use: You DO NOT need to mix down Image Armor. It is ready to use (RTU) right out of the container.Always SHAKE the container before using or pouring into your pretreatment machine container. When returning unused pretreatment from a machine, strain it to ensure no fibers or dirt, dust, contaminants are in the solution. A clean solution keeps you happy.

Application: When applying pretreatment to the garment, make sure to apply it as evenly as possible (mechanical pretreatment machines are the best). Depending on the shirt being pretreated there are some variables to consider on how much to apply. A good starting point is 15-18 grams per 14″x14″ area. NOTE: 18-26 grams may provide you with better washability and white optical brightness. Test to find your best laydown for the garment you are pretreating. Application amounts will vary based on the weight and quality of the garment being printed. The heaver the garment, the higher the amount of pretreatment needed. The darker the color, the more pretreatment is required. The lighter the weight of the shirt, you can usually reduce the amount of fluid applied to the garment. The lighter the color of the shirt, less pretreatment is usually required. HINT: You might try cutting PLATINUM for LIGHT colored shirts with a 1:1 mix (using one distilled water to one pretreatment) to reduce yellowing or discoloration. DO NOT USE on white or natural colored shirts. Always use a high quality garment that is ring-spun with a tight knit weave. The smoother and tighter the weave, the better your final DTG print.

Curing: Set your heat press to 330FCure time: 30 seconds or until dry. You might try two 20 second presses. Use brown KRAFT paper for best results. Teflon can result in a glossy sheen. Kraft paper should be easily removed and not stick to the shirt when peeling. Sticking will result in fibers sticking up resulting in non-smooth white prints. Pressure setting: Heavier pressure can be used and will help press/mat down fibers during the drying process. DO NOT allow cover sheet to remain on garment after pressing or crystallization can occur as pretreatment vapors cool.

Storage of Garments: Pre-pretreated shirts can be done ahead of time. Try to use them as soon as possible. It is not recommended to go more than two weeks after pretreating before using. Always re-press the garment for 5-10 seconds with light pressure if they’ve been stored for more than a day. The shirts will collect moisture, and moisture is the enemy of good pretreated shirts. ALWAYS MAKE SURE YOUR SHIRTS ARE MOISTURE FREE BEFORE PRINTING. DO NOT OVERHANDLE the shirts. Touching, bending, folding, throwing shirts around will damage and break the pretreatment down on the shirt. For the best results, try not to “man handle” the garments prior to printing.

 

 


MSDS for Image Armor E-series Inks

 

 

Image Armor Inks are Oeko-Tex Eco Passport Certified

It is another step forward for the Image Armor line of DTG inks. Our entire line of direct to garment printing inks are now officially Eco Passport Certified. ECO PASSPORT by OEKO-TEX® is an independent certification system for chemicals, colourants and auxiliaries used in the textile and leather industry. During a multistep process, our DTG inks were analyzed as to whether each individual ingredient in the chemical product meets the statutory requirements and that it is not harmful to human health. The ECO PASSPORT stamp of approval is an extremely valuable certification and is used as credible proof of sustainable textile and leather production.

 

Instructions for the Image Armor PLATINUM Dark Shirt Pretreatment

No additional instructions found for this product.

Customer Reviews

Based on 2 reviews
50%
(1)
50%
(1)
0%
(0)
0%
(0)
0%
(0)
J
John Powers
Works about the same as Brother pretreat

Printed shirts side by side with Brother pretreat and could not tell the difference. Might want to consider shipping a concentrated version to save on shipping costs.

A
A.R.
Platinum Pretreat is awesome

The colors and whites just pop tremendously with this pretreat.