Black Liter E-Series Image Armor Garment Ink

Image Armor SKU: IABKliter

$99.00 $125.00 Save $26

Earn [points_amount] when you buy this item.

5.0 / 5.0 based on 1 review

1 Liter (33.8 oz) bottle of Image Armor Black Ink for all Epson Based Garment Printers including the DTG, Anajet, Neoflex, Fast T-Jet, Veloci-Jet, TexJet, FreeJet, IDot, Mod1 and many more (see below).

IMAGE ARMOR E-SERIES INK has a 35 second cure time! Yah, I know, it's hard to believe when you are use to waiting 120-180 seconds for your shirts to cure. Time is money, we all know that. It's great that this ink has the BEST PRICE on the market, but it's even more exciting that it can save you a ton of money in curing time.

IMAGE ARMOR E-SERIES INK has more going for it than just a great price. It was also formulated to "play nice" with all your printer components. This means your wiper and capping station will have less build up and will be easier to clean. OH YES, that means less down time...better performance....... MORE PRINTING!!!

IMAGE ARMOR E-SERIES INK has done an amazing job improving the cure time, but they didn't stop there. They made it their mission to improve the brightness of their inks AND the washability too. These high standards have resulted in longer lasting, better looking prints wash after wash. It's almost shocking to see how they look after 30 washes!

Many users have experienced better printability and coverage when used in conjunction with Image Armor Pretreatments. You can experience awesome looking DTG prints on some of the "less" than perfect shirts that you would normally stay away from. If you have been printing for a while you know what this means. E-Series ink opens up a whole spectrum of lower priced shirts that just didn't work well with other brands of ink. Happy dance indeed!!

Instructions for curing Image Armor Ink:

  • Cure the Image Armor Inks at 356F for 35 seconds. You can go a little longer on the cure time, however best results are achieved at the suggested time and temperature
  • Use light to medium pressure on the heat press to cure the ink.
  • Allow for 24 hours after heat pressing before washing the shirt. This allows continued curing of the ink. Washing immediately will result in about a 10-15% decrease in print quality life.
  • For the best results, use Image Armor Pretreatments 

 

DTG Printer Compatibility

Since the new E-SERIES inks are being released for all of the Epson® repurposed printers you might be wondering if you will be able to use them. Some of the printers include (but not limited to):

BRAND Compatible with E-series Ink
Anajet Sprint, FP-125, SP200
DTG Kiosks, HM1, Viper, M2, M4
Neoflex NeoFlex Textile
Melco Melco-Jet, G2, G3
Spectra Spectra 3000 and Spectra 3880
Fast T-Jet T-Jet, T-Jet 2, T-Jet 3, Blazer Express, Pro
Belquette Flexi-Jet, Mod1
M&R Digital I-Dot 2100, 4200 and M-Link OV1
FreeJet FreeJet 300TX, 500TX and 700TX
PolyPrint Texjet, SuperJet and TexJet Plus
Resolute Rjet-i3, Rjet-R4 and Rjet-R5
DYI Printers All DYI Printers based on an Epson Printer
Other Printers MS Zero, MS-One, Advantage, Chinese Brand

 

Image Armor Inks are Oeko-Tex Eco Passport Certified

It is another step forward for the Image Armor line of DTG inks. Our entire line of direct to garment printing inks are now officially Eco Passport Certified. ECO PASSPORT by OEKO-TEX® is an independent certification system for chemicals, colourants and auxiliaries used in the textile and leather industry. During a multistep process, our DTG inks were analyzed as to whether each individual ingredient in the chemical product meets the statutory requirements and that it is not harmful to human health. The ECO PASSPORT stamp of approval is an extremely valuable certification and is used as credible proof of sustainable textile and leather production.

Instructions for the Black Liter E-Series Image Armor Garment Ink

No additional instructions found for this product.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Martha R.
Good Ink

I have had good success with this ink in my HM1.