EMC 10 THE INNER HOOK BASKET

Osman Bayrak

THE INNER HOOK BASKET (SPINDLE) ROTATES WHEN THE RETAINING FINGER IS REMOVED, BUT THE Z TIME ERROR IS STILL PRESENT:

  1. Power off the EMC 10 and remove the Z Drive cover, refer to the Parts Manual page P-1 item #2. Once the cover is removed there will be a pulley with a timing belt around it. Turn the pulley clockwise, and make sure the Needle Bar can be lowered and raised without any difficulty.
  2. If your are unable to turn the pulley then remove the Lower Needle Case Cover and loosen the silver needle bar clamp of the needle that is located above the needle plate. Try to move the needle bar up and down, if it moves try rotating the pulley at the back of the sewing head.
  3. If it still won't move check for a bent needle bar or oil all of the Needle Case Assembly. If it still doesn't turn call your distributor.
  4. If the pulley rotates easily through 360 degrees continue to turn the pulley until the take up levers are all even. The engaged needle will be down.
  5. Turn the machine on and go to the Head Timing Menu, press Enter. Then, do an ALT and Up Arrow which will make the machine go to head up. If it doesn't call your distributor.