Melco G2 Large Table


Tools needed for installation:

  • 2.5mm Metric Hex Driver
  • 3mm Metric Hex Driver

Needed Parts:

g2 large 1

Installation Instructions

  1. Remove the Standard Frame Table from the machine.
    g2 large 2
    1. Loosen and remove the hardware – 4 screws – at each corner of the table using the 3mm Metric Hex Driver.
    2. Remove the Standard Frame Table and store it in a secure location.
  1. Align the Large T-Shirt Table as shown in the picture below and secure it to the Table Support using four (4) M4 Countersunk Hex Screws.

g2 large 3


g2 universal note

Leave a comment