EMC 10 APPLICATION RUN ERROR

Osman Bayrak

APPLICATION RUN ERROR:

  1. The EMC 10 tried to Down Load the RSA Files and it was not able to. Power off the EMC 10 and on again to retry the Down Load function.
  2. If the last operation doesn't work, configure the machine again using the information in the Operations Manual (Configuring the EMC10).
  3. If it still does not work then check the Data Cable coming from the computer for connectivity and make sure that it is inserted into the correct port of the CPU PCB.
  4. Power the computer down in a normal fashion, and power it up again after about 20seconds. Go back into EDS, and see if the problem goes away. This does not apply to the Premier Keyboard.
  5. If not, try reloading the RSA files, and try booting again.
  6. If still a problem, order a CPU PCB for the embroidery machine from your distributor.