Viper 2 Tutorial - Power and USB Cables


A. Plug the power cord into the back of the machine 

1. Plug the other end into a standard wall outlet or a UPS (Note - We strongly recommend using a quality UPS to protect your investment)

2. Turn on the power switch next to the power cord. Power may or may not come on at this time

B. The USB cable must pass through the support bracket (guide), before plugging it into the machine

1. This is to keep the cable away from the platen, as the machine prints

2. Leave a soft bend in the cable



Buy ink for your DTG Viper 2 here

Buy parts for your DTG Viper 2 here

Leave a comment

Please note, comments must be approved before they are published