Viper 2 Tutorial - Loading the Inks

Dean Armando

A. Gather your 4 White ink cartridges, along with your Cyan, Magenta, Yellow, and Black ink cartridges, and a single Flushing solution cartridge 1. Place them on the bed of the machine 2. The 8 Flushing cartridges would replace the ink cartridges, in the event we wish to flush the ink...

Viper 2 Tutorial - Loading the Platens

customer

A. The Viper 2 uses a 4-2-1 platen system 1. In a 4 up configuration, you can put 4 small items or print 4 small prints (such as left chest). Each measures approximately:  7 ¼in X 11in 2. In a 2 up configuration (using the two plastic adaptors), you can...

Viper 2 Tutorial - Aligning the Platens

customer

EXTREMELY IMPORTANT - This should be done BEFORE you perform the “Loading Inks” procedure, but after you have installed the Flushing solution cartridges! A. Tools Required 1. A height gauge. We like using three quarters, readily available in most households, but it can be almost anything – an Allen wrench, a...

Viper 2 Tutorial - Loading the Cartridges

customer

A. Gather eight of your nine flushing solution cartridges 1. The illustration and video show 4 flushing solution cartridges and your 4 color cartridges, but for this step, use ALL flushing solution cartridges B. Raise the ink cartridges cover C. Insert the flushing solution cartridges into the machine, in all...

Viper 2 Tutorial - Anatomy

customer

    Buy ink for your DTG Viper 2 here Buy parts for your DTG Viper 2 here

Viper 2 Tutorial - Power and USB Cables

customer

A. Plug the power cord into the back of the machine  1. Plug the other end into a standard wall outlet or a UPS (Note - We strongly recommend using a quality UPS to protect your investment) 2. Turn on the power switch next to the power cord. Power may or may...

Viper 2 Tutorial - Uncrating and Unpacking

customer

A. Inspect the crate for signs of physical damage 1. If damage is noticed, note it as well as document it with pictures from a camera or cell phone. 2. This does not necessarily mean the equipment is damaged B. Carefully look at the “Tilt Watch” indicator 1. This will...

Video - DTG Viper 2 - Replacing Cartridge Bay and Dampers

customer

Learn how to replace the ink cartridge system and damper assembly in your DTG Viper 2 garment printer.  Buy the ink cartridge system and damper assembly for the DTG Viper 2 here      

Video - DTG Viper 2 - Changing the Print Head

customer

Learn how to change the print head on your DTG Viper 2   Buy ink for your DTG Viper 2 here Buy parts for your DTG Viper 2 here

Video - DTG Viper 2 - Printing a White Shirt

customer

Buy Light Shirt Pretreatment for DTG Viper 2 Buy ink for your DTG Viper 2 here Buy parts for your DTG Viper 2 here

Video - DTG Viper 2 - Pretreating Wagner

customer

Find the pretreatment you need for all shirts    Take a look at the Pearl PTM Pretreatment Machine  Buy ink for your DTG Viper 2 here Buy parts for your DTG Viper 2 here

Video - DTG Viper 2 - Printing a Black Shirt Underbased Images

customer

Find the pretreatment you need for all shirts     Take a look at the Pearl PTM Pretreatment Machine Buy ink for your DTG Viper 2 here Buy parts for your DTG Viper 2 here

Video DTG Viper 2 End of Day Maintenance

customer

Buy Cleaning Solution and cleaning supplies like swabs and wipes for cleaning your DTG Buy your DTG Viper 2 Parts Here Buy DuPont ink for your DTG Viper 2

Viper 2 Tutorial - Nozzle Checks and Head Cleanings

customer

A. Perform a “Nozzle Check”, preferably on a transparency (available at your local office supply stores), so you can see your colors as well as the white inks. 1. This ensures that the print head is fully primed and ready to print 2. Place the transparency, oriented in landscape, so...

Viper 2 Tutorial - Daily Start Up

customer

  A. Agitate the white inks by holding the cartridge upright (vertical), then turn the cartridge over, so the lower end is now at the top. Then turn back upright. 1. Only shake the inks if they have not been agitated in a while. Shake the white inks vigorously if...

VIDEO Replacing the Print Head on the DTG Viper 2 Garment Printer

customer

Learn how to replace, clean or repair the Print Head on your DTG Viper 2 Garment Printer.  buy Dupont ink and learn how to Refill the cartridges on the DTG Viper 2 Garment Printer     Buy DuPont ink for your DTG Viper 2