Your safety and the safety of others are very important.

We have provided many important safety messages in this manual. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can injure you or others.

This symbol will also alert you of potential damage that may occur to the machine if proper instructions are not followed.


You could cause damage to the machine if you don't properly follow instructions.

You can be injured if you don't properly follow instructions.


All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.


WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the Pre-treament Machine, follow basic precautions, including the following:

  • Read all instructions before using the Pre-treatment Machine
  • Do not overload the Pre-treatment Machine with excessive number of garments or large garments.
  • Do not tamper with controls
  • Do not repair or replace any part of the Pre-treatment Machine or attempt any servicing unless specifically recommended in this manual or in published user-repair instructions that you understand and have the skills to carry out.
  • Do not reach into the Pre-treatment Machine during a spray cycle.
  • Do not install or store the Pre-treatment Machine where it will be exposed to the weather.
  • Do not use gasoline, solvents, acids or other flammable or explosive substances with the Pretreatment Machine. These substances give off vapors that could ignite or explode.
  • Do not place excessive weight on the nozzle cart. This may cause permanent damage to the rail system.
  • Always wear the proper protective equipment recommended by the chemical manufacturer when spraying chemicals.


Buy the Pearl Lite Pretreatment Machine here

Read a review on the Pearl Lite Pretreatment Machine here

Leave a comment