ThermoFlex Plus

In stock
SKU
ThermoFlexPlus
$7.50

View/Print Instructions

Temperature
330° F
Time
15 Seconds
Peel
Peel hot or cold. Light blue COLD ONLY
Pressure
Medium/firm even pressure
Cut/Print
Cut mirror image
Materials
Cotton, linen, wool, lycra, spandex, polyester blends. NO nylon, NO mesh
Care
Wash warm, tumble dry on normal setting

Additional Instructions

Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:

Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Cut Settings for Graphtec CE6000:

 Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 16

*HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 3

Speed: 8

Force: 6

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Iron-On

Pressure: Default

Blade: Fine-Point Blade (Standard)

 

There are no reviews yet Be the first to review this product
You're reviewing: ThermoFlex Plus as
Your Rating

Ask a question about this product
Enter your information and we will respond as quickly as possible!
All your garment printing ink, parts, supplies, heat transfer vinyl, vinyl cutters, white toner transfer printers and transfer paper in one place