Anajet mPower MP5 MP10 Control Panel

Anajet SKU: USEDmppanel

$399.00 $956.00 Save $557

Used Anajet mPower MP5 MP10 Control Panel

All mPower control panels can work as either an MP5 or MP10.  The only difference is the firmware. An MP10 control panel can be reprogrammed to be a MP5 and vice versa.  Make note of what firmware you have on hand or reference https://anajet.com/support/mpower/mpower-firmware-updates/

to change it's is a two step process.

  1. Complete an SD card update  - Refer to chapter 10 of the user manual. You can download this from Anajet's website where they have 3.8.0 SD card update for MP5 and MP10. Copy the zip package to an SD card (MP10 if you want to make the panel MP10) and then install the SD card in the side of the control panel. Then turn the printer off and back on and the panel will update.
  2. Install the latest update (4.1.0) via the flash drive – which version do you have? Also if you have very old hardware this firmware will not work. Check to see if the maintenance station has the relief valve on it. 

    Without relief valve – use FW ver 3.8.3 – with relief valve use FW ver 4.1.0

THIS IS A USED PART IN PERFECT WORKING CONDITION. WE PRIDE OURSELVES ON MAKING SURE ALL USED PARTS AND ACCESSORIES ARE IN PERFECT WORKING CONDITION BEFORE WE SELL THEM, HOWEVER THERE ARE NO REFUNDS OR RETURNS ON USED PARTS. PLEASE BE AWARE OF THIS BEFORE PURCHASING.

Instructions for the Anajet mPower MP5 MP10 Control Panel

No additional instructions found for this product.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

We're here to assist you with all your garment printing needs. Reach out to our dedicated team during our office hours, and we'll ensure you get the support you need.

Office Hours

Monday to Friday: 9:00 AM - 5:00 PM

Contact Methods

For general inquiries, you can contact us through the following:

Address: 375 Oser Ave, Hauppauge, NY 11788