Anajet mPower Image Armor Bag R-Series Change over Kit
This changeover kit includes everything you need to properly switch your ink system on the Anajet mPower MP5/MP10 to the new Image Armor R-series ink.
The Changeover Kit includes:
2 220ml Bags of Image Armor R-Series White ink
1 220ml Bag each of Image Armor R-Series CMYK
6 Replacement Bags of Cleaning Solution for your Anajet Mpower
1 Gallon of Image Armor Ultra
2 Anajet mPower Damper Sets
Instructions for curing Image Armor Ink:
- Cure the Image Armor Inks at 356F for 35 seconds. You can go a little longer on the cure time, however best results are achieved at the suggested time and temperature
- Use light to medium pressure on the heat press to cure the ink.
- Allow for 24 hours after heat pressing before washing the shirt. This allows continued curing of the ink. Washing immediately will result in about a 10-15% decrease in print quality life.
- For the best results, use Image Armor Pretreatments (Image Armor Ultra, Image Armor Dark, Image Armor Light)
PRINTING TIP - On the MP5 and MP10, some customers say they get the best results when they change the "Color Layer Wait" time to 20 seconds
Get the best results with your T-Shirt Printing by using only Image Armor E-Series Ink and Image Armor Pretreatment.
Have questions?? Call us at 631-858-0114