ALL Ricoh Ri3000 and Ri6000 printer owners. NOW you can use chipless cartridges for your printer by downloading the Ricoh firmware below that will allow you to bypass the chip. No more hitting IGNORE….Save Money, Same ink, No hassle.
Image Armor Cyan Ink 220ml Bag for the Ricoh based Anajet mPower MP5 and MP10
1 220ml Bag of Image Armor Super Bright CyanInk for the Ricoh based Anajet mPower MP5 and MP10
IMAGE ARMOR R-SERIES INK has a 35 second cure time! Yah, I know, it's hard to believe when you are use to waiting 120-180 seconds for your shirts to cure. Time is money, we all know that. It's great that this ink has the BEST PRICE on the market, but it's even more exciting that it can save you a ton of money in curing time.
IMAGE ARMOR R-SERIES INK has more going for it than just a great price. It was also formulated to "play nice" with all your printer components. This means your wiper and capping station will have less build up and will be easier to clean. OH YES, that means less down time...better performance....... MORE PRINTING!!!
IMAGE ARMOR R-SERIES INK has done an amazing job improving the cure time, but they didn't stop there. They made it their mission to improve the brightness of their inks AND the washability too. These high standards have resulted in longer lasting, better looking prints wash after wash. It's almost shocking to see how they look after 30 washes!
Many users have experienced better printability and coverage when used with Image Armor Pretreatments. You can experience awesome looking DTG prints on some of the "less" than perfect shirts that you would normally stay away from. If you have been printing for a while you know what this means. R-Series ink opens up a whole spectrum of lower priced shirts that just didn't work well with other brands of ink. Happy dance indeed!!
To disable the reader in the printer for the MP5 or Mp10:
Cartridge Check – NO
Then you will find Cartridge check, switch to NO
PRINTING TIP - On the MP5 and MP10, some customers say they get the best results when they change the "Color Layer Wait" time to 20 seconds
Instructions for curing Image Armor Ink:
Cure the Image Armor Inks at 356F for 35 seconds. You can go a little longer on the cure time, however best results are achieved at the suggested time and temperature
Use light to medium pressure on the heat press to cure the ink.
Allow for 24 hours after heat pressing before washing the shirt. This allows continued curing of the ink. Washing immediately will result in about a 10-15% decrease in print quality life.
For the best results, use Image Armor Pretreatments
Image Armor Inks are Oeko-Tex Eco Passport Certified
It is another step forward for the Image Armor line of DTG inks. Our entire line of direct to garment printing inks are now officially Eco Passport Certified. ECO PASSPORT by OEKO-TEX® is an independent certification system for chemicals, colourants and auxiliaries used in the textile and leather industry. During a multistep process, our DTG inks were analyzed as to whether each individual ingredient in the chemical product meets the statutory requirements and that it is not harmful to human health. The ECO PASSPORT stamp of approval is an extremely valuable certification and is used as credible proof of sustainable textile and leather production.
Instructions for the R-Series Image Armor Anajet mPower Cyan 220ml Bag
No additional instructions found for this product.
We're here to assist you with all your garment printing needs. Reach out to our dedicated team during our office hours, and we'll ensure you get the support you need.
Monday to Friday: 9:00 AM - 5:00 PM
For general inquiries, you can contact us through the following: