I Hit My Hoop With The Needle on My Barudan
Osman Bayrak
Many times, nothing other than a broken needle or bent presser foot results from hitting the hoop. If this happens, simply replace the needle, and straighten out the presser foot and continue. If sewing problems continue after this, more serious damage such as a broken needle bar driver may have...
Adapting 3phase Machines To Run on Single Phase
Osman Bayrak
The information in this article applies to the following machine models: Barudan Multi-head machines, generally 12 heads or more SUMMARY Many larger Barudan embroidery machines, typically 12 or more heads, are supplied with 3 phase transformers. These provide the smoothest power to the machine, and are more efficient. Customers purchasing...
Oiling Your Elite Pro Embroidery Machine
Osman Bayrak
Proper Lubrication will help your machine last a long time and avoid costly repairs. We've removed covers in some of the photographs to help show where to oil. We suggest that you may want to do the same- remove the cover to be sure that you're oiling the proper place....
Fuse Locations and Replacement Chart for Zig-Zag Machines
Osman Bayrak
The information in this article applies to the following machine models: Barudan B2000 Single head Zig-Zag Embroidery machines Meistergram models Single head Zig-Zag Embroidery machines SUMMARY This page provides a list of all fuses used in the Zig-Zag machines produced under the Meistergram and Barudan Labels. Fuses provide electrical protection...
How can I tell when my Barudan machine was built?
Osman Bayrak
On the name plate there is a serial number. For American built machines, the first two digits of the serial number represent the year the machine was manufactured. The last digit, if it is a letter, represents the month in which the machine was manufactured. The letters A-M are used...
How do I adjust my tension on my Barudan?
Osman Bayrak
For machines with 9 needles or less: There are three tensioners for the top thread: The upper, center, and the lower (or rotary) tensioner. Most adjustments are done with the upper and/or center tensioners. The general rule is; what you do to the upper, you should do to the center,...
How do I figure out what model my Barudan machine is?
Osman Bayrak
There is a "NAME PLATE" on every machine, which lists the model name, serial number, and power specifications. On single heads, it is located just underneath the table top fastened to the metal frame. On multi-headed machines, it is located on the metal frame near the center of the machine,...
Why is my machine telling me to call Barudan America? What should I do?
Osman Bayrak
Your machine is installed with a time clock that prompts you to call and get a password to disable the clock after a certain time period. The message you see is a warning letting you know the time clock is about to expire. Once the time clock expires, you will...
Lubrication chart for BEDT-ZQ-501 (Elite Pro) machines
Osman Bayrak
The information in this article applies to the following product: Barudan BEDT-ZQ-501 Elite Pro single head embroidery machine SUMMARY This document shows the locations and service intervals for lubricating the BEDT-ZQ-501 "Elite Pro" machine. This information has been updated since the first machine shipments. BEDT-ZQ-501 (Elite Pro) LUBRICATION CHART...
What to do when your Barudan machine is giving an Unexpected Fatal Error
Osman Bayrak
What is wrong? What should I do? (BEAT 900 series only) Typically this can be corrected by a simple "System Reset" To do a "System Reset": Power off your machine, power back on, tap the Scroll Lock key until the Scroll Lock light comes on. The machine will boot up...
Needle Depth Adjustment, ZN/ZQ Sewing Heads
Osman Bayrak
The information in this article applies to the following machine models: Barudan N Series Multihead Embroidery machines: BENS, BENY, BENR, BENB Barudan BENT/ ELITE Single Head Embroidery machines SUMMARY Improper needle depth can cause a variety of sewing problems. This procedure details how to check if the needle...
What to do when Barudan machine is not detecting thread breaks
Osman Bayrak
Thread break detection is done by the check spring. If the check spring is sitting against its post, then the machine assumes the thread is broken. If the machine consistently is not recognizing thread breaks on a particular needle, look at the check spring area. Be sure the spring can...
Should I shut the main breaker on my Barudan embroidery machine off at night?
Osman Bayrak
It is recommended that you shut your machine off at the breaker if it is not going to be in use for an extended period of time to protect it from extreme electrical influences such as lightning.
How To Adjust The Check Spring On The Barudan?
Osman Bayrak
To adjust the check spring, use a slotted screwdriver. Put the screwdriver into the end of the lower (or rotary) tension post. Turn the screwdriver counterclockwise until the check spring moves off its post. Then, turn the post clockwise until the check spring touches the post then approximately 1/4 turn...