Puff Vinyl by the Ft

$5.00

Shipping calculated at checkout

Specialty Materials SKU: PuffRoyalBlueVinyl

Available Now!

Black
White
Red
Royal Blue
Yellow
Neon Green
Neon Pink

$5 per foot of Puff Vinyl

Give your prints a fun 3D look with puff vinyl! This material is super easy to use and only requires one press. It is easy to weed & its pressure sensitivity allows for quick and painless repositioning.

Colors GPI offers: White, black, red, royal blue, yellow, neon green, neon pink.

blue fist puff

Blade – 45° with low pressure

Temperature
White: 290° F
Pink & Neons: 275° F
Time
10 Seconds
Peel
Hot peel. Remove carrier / transfer sheet immediately
Pressure
Medium/firm even pressure
Cut/Print
Cut mirror image
Materials
Cotton, uncoated polyester, fabric blends, polyester/acrylic, & similar fabrics. NO NYLON
Care
Wash inside out, cold water, gentle cycle. Tumble dry low

rose puffgreen puff

Additional Instructions

Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:

Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Cut Settings for Graphtec CE6000:

Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 16

*HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 3

Speed: 8

Force: 6

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Iron-On

Pressure: Default

Blade: Fine-Point Blade (Standard)