Comes in either a 8.5" x 11" Sheet for 12" x 100' roll
Add unique effects to your garments with our wide selection of Transfer foil for White toner transfer printers and DTG Printers. Our foils offer high tolerance to vast temperature ranges along with an easy peel. The washability is superb, and the brilliance remains, wash after wash.
Application Instructions Using White Toner Printers and Laser Dark Low-Temp Transfer Paper:
To Print: Print your design using CMY with White Toner ON. (In your design, use 100% each C,M,Y to create a composite black). Use mirror-print option in Job Option settings, and select Transparency in the printer driver's 'Media Weight' setting. Use the multi-purpose (bypass) tray to feed the A-Foil page with the matte side face-up (do not print on glossy side).
Preheat the lower platen of your heat press to 310F by closing the press while empty for 20-30 seconds - this is only necessary for first presses, or returning to the press after break in production.
Place the A-Foil onto the lower platen (printed/matte side face-up). Place the B-Paper (white/toner coated side face-down) on top of A-Foil sheet. This sheet is slightly smaller than A-Foil sheet to allow the sheets to easily separate after first press. You may cover with an additional parchment, silicone, or copy paper for additional protection for your heat press platen. Press the two sheets together for 90-110 seconds.
Open heat press and separate the two sheets immediately, slowly & smoothly. This should leave an opaque white coating onto the toner layer of your printed A-Foil sheet.
Trim the edges of the A-Foil sheet to prevent the residual toner on edges from transferring to your garment.
Press to the textile with the following instructions:
Cotton: 300-320F for 5-10 seconds, very light pressure Polyester: 248-266F for 5-10 seconds, very light pressure Blend Fabrics: 285-305F for 5-10 seconds, very light pressure Polypropylene: 220F for 30 seconds, very light pressure Paper/Cardboard: 210F for 5-10 seconds, very light pressure
Remove from heat press and allow to cool completely before removing the A-Foil backing.
Return the garment/substrate to the press and cover the transfer with desired decorative hot stamping foil. Cover with parchment or silicone sheet.
Press according to following instructions:
Cotton: 300-320F for 30-45 seconds, heavy pressure Polyester: 248-266F for 30-45 seconds, heavy pressure Blend Fabrics: 285-305F for 30-45 seconds, heavy pressure Polypropylene: 220F for 30-45 seconds, heavy pressure Paper/Cardboard: 210F for 30-45 seconds, heavy pressure
Remove from heat and allow to cool before removing foil.