HOW TO CLEAN AND OIL THE MOTION CONTROL RAIL SYSTEM OF THE VIPER MAXX

Viper Pretreatment Support

HOW TO CLEAN AND OIL THE MOTION CONTROL RAIL SYSTEM OF THE VIPER MAXX

For long term functionality we recommend a weekly cleaning and oiling of the rail systems in the Viper MAXX. This preventative maintenance will help keep the rail system running smoothly and you pretreating without any issues.

HOW TO REMOVE, REPLACE, AND ALIGN SPRAY TIPS ON THE VIPER MAXX

Eventually you will need to remove the spray tip in the Viper MAXX. It's easy to do. Here we show how to remove it, replace with a new tip, and use the SPRAY TIP GUAGE to perfectly align the spray tip to the platen so you get that perfect spray...

USING and RESETTING THE JOB COUNTER ON THE VIPER MAXX

The Viper MAXX has an individual job counter that shows the total number of sprays completed for that particular job or for the entire day. The Job Counter can be reset at any time - here we show you how.

HOW TO CHANGE THE DATE AND TIME ON THE VIPER MAXX

Setting the Date and Time is a simple procedure to do on the Viper MAXX DTG direct to garment pretreating machine. Here we show you how to do it quickly and easily.  

HOW TO USE & CHANGE THE AUTOCLEAN FEATURE ON THE VIPER MAXX

The Viper MAXX DTG Pretreatment Machine has a built in AutoClean feature that sprays a little bit of pretreatment through the spray tip after a period of inactivity. This is designed to help keep the spray tip open and wet during the course of a normal day of printing if...

WHAT ARE "STEPS" AND HOW DO THEY WORK ON THE VIPER MAXX

The Viper MAXX DTG Pretreatment Machine utilizes "STEPS" between each spray pass. This allows the user to achieve the perfect spray pattern every time by adjusting the STEPS to "mate" up each spray pass no matter the spray tip or wear the tip might have incurred over time.

HOW TO USE & CHANGE CUSTOM SPRAY PRESET AREAS ON THE VIPER MAXX

The Viper MAXX DTG Pretreatment Machine has 30 individual custom spray presets. Here we look at how to use the 4 standard preset buttons, change their values, and then add new custom spray presets to the Viper MAXX.  

HOW TO CHANGE & SET CUSTOM SPRAY AREAS ON THE VIPER MAXX

The Viper MAXX DTG Pretreatment Machine allows for almost an unlimited spray application. You can spray a small left chest to an oversized spray area with the unique MAXX Stepping system. Here we show how to set and adjust where the MAXX will spray on the shirt.  

CHANGING THE AMOUNT OF PRETREATMENT APPLIED WHEN USING THE MAXX

Here we take a look at how to use the touch screen interface and change the amount of pretreatment that can be applied. In addition, we show how to use the FLUID PRESETS to change the label and amount of pretreatment applied for the four preset buttons on the SPRAY...

UNCRATING & SETTING UP YOUR MAXX PRETREAT MACHINE

We cover how to un-crate and setup your Viper MAXX pretreatment machine and show you how to get started spraying and learning how to use the machine.  

INTRODUCING THE VIPER MAXX PRETREATMENT MACHINE

The Viper MAXX DTG Pretreatment Machine is truly a revolutionary new way to help you achieve the best possible pretreatment application. This results in the potential best direct to garment prints you can achieve. Learn how the MAXX will change the way you pretreat.

Garment Printing Support

More