Troubleshooting the Texjet ShorTEE Garment Printer

Texjet ShorTee Support

Troubleshooting the Texjet ShorTEE Garment Printer

3 comments

Troubleshooting GENERAL PROBLEMS   Problem: After you print the image the color looks great, but after you fix it, the print looks dull.   Causes and Solutions: The temperature is set too high on the heat press. Make sure you test the temperature using heat test strips or a heat...

Texjet RIP software operation on the Texjet ShorTEE Garment Printer

Texjet RIP v7 Software Operation New Worktable (CTRL + N) This command allows opening a new workspace (keeping the current workspace for future use), if open, and beginning a new job. A workspace is an area defined by the user, usually equal to the platen present in the printer, onto...

Driver installation on the Texjet ShorTEE Garment Printer

Driver installation for USB and NETWORK   Do not connect the printer with the USB cable to the computer before installing the Epson 3880 printer driver. Select accordingly to your computer platform the driver installer found in the driver folder of the Installation USB drive. Run the installation as (as...

Monthly and Yearly Maintenance on the Texjet ShorTee Garment Printer

Monthly The monthly maintenance has to be performed at least once a month. Some parts have to be observed for their proper operation and cleaned if necessary. 1. The printer must be ON and on Home screen. 2. Use a cross screwdriver to turn on the maintenance gear counterclockwise to...

Maintenance on the Texjet ShorTee Garment Printer

The user needs to perform a maintenance procedure to keep the machine running reliably. Most common technical problems appear on machines that have not been maintained properly. The garment printer is not a normal ink jet printer. While printing on garments, the printer must print a lot more ink than...

Platen Table Height Adjustment on the Texjet ShorTee Garment Printer

Wear the t-shirt on the platen Press the Check button Turn on the height lever (8) clockwise to adjust the appropriate height When the Red Limit height indicator (4) turns ON, lower the platen by turning counterclockwise  When the red height limit indicator is OFF then the table has the...

Start Up and Ink Loading on the Texjet ShorTee Garment Printer

After the first powering up of the printer only one (1) ink charge is needed. To perform the ink charges use the Polyprint tool, which can be found in the installation folder of the RIP software C:program Files (x86)>TexjetRip>Tool>PolyprintTool Select the printer and click on ink change. After the ink...

Setting up Ink Cartridges on the Texjet ShorTee Garment Printer

WARNING: - Always keep inks/cleaners/coatings and cartridges out of the reach of children. - Do not drink inks/cleaners/coatings. Keep away from food and drink, wash hands before eating, drinking, smoking. Handle in accordance with good industrial hygiene and safety practice. - When handling inks/cleaners/coatings make sure to wear gloves complying...

Texjet ShorTee Garment Printer Component Tour

Control Panel Keypad with display T-shirt Tray Cartridge Cover Maintenance Gear Maintenance Bottle Cable Connection Interface Lever for height adjustment Power ON/OFF Blue light status indicator Home button Back button Touch Panel (shows the printer status, ink levels, menu, error messages etc.) Up - Down arrow   Display: TexJet ShorTee...

Garment Printing Support

More