How To Install The Leveling Bolts on a SWF Embroidery Machine

Osman Bayrak

How do I Install the Leveling Bolts on a commercial embroidery machine?

The best way is to watch a training video like this on installing the Leveling Bolts on a commercial embroidery machine. Whether you have a Tajima, SWF, HAPPY or Toyota embroidery machines, they all have to be stabilized and leveled.  If you are working in a basement or a garage like many embroiderers, you don't really  need to be concerned about vibration as long as you level the machine properly. 

What are some good tips on leveling and stabilizing my embroidery machine?
If you feel the floor is unstable than you can put  2x2's down with insulation and 3/4" plywood. You don't want to jeopardize the performance of the machine or the quality of the embroidery. The machine is very heavy and should hold steady to the floor, again, only if it is leveled properly. Your noise level may be a little higher if your machine is on a raised floor but just make sure all the leveling feet are tight and that you used a level to ensure it's not off balance