Releasing the Anajet Print Head Carriage

customerNovember 04, 2013

 

    Press the POWER button from control
panel to power down the print engine.

 

 sprint print head carriage

Press DOWN ARROW & ENTER 

simultaneously to release Print Carriage, slide the Print Carriage to the left.

 

 

     Press DOWN ARROW & ENTER

simultaneously again to raise the wiper blade to facilitate cleaning

 

 

Manually Releasing the Print Head

inkbay
 

 

 

1. Power down the printer at the front and remove the black ink cartridge (4th Ink Bay)

 


2. Use a long screwdriver to turn the maintenance station screw COUNTER-CLOCKWISE.

            ◦ Put slight pressure on print carriage so it will slide when released

 


3. When carriage is released, keep turning the screw until the wiper-blade and internal pads rise

Leave a comment