Pearl Lite - Powering the Pearl Lite

customer

 

The Pearl Lite is powered with either 110V/60Hz or 220V/50z. Please check with distributor to verify the power requirements for the Pearl Lite in your region.

1. Plug the power cord in to the power connector located in the back of the Pearl Lite.

Pearl Lite Use Care Guide 7

2. Press the Power Switch (1) to the ON ( | ) position.

3. The Pearl Lite Display (3) will display the last density setting used before the unit was powered off.

 

Buy the Pearl Lite Pretreatment Machine here

Read a review on the Pearl Lite Pretreatment Machine here

Leave a comment