Releasing the Print Head Carriage on the Melco G2

customerAugust 01, 2018

g2 printhead warning

When performing normal maintenance and some trouble shooting steps it will be necessary to access the working area of the Print Head Carriage.  To do so release it from its parked position.

  1. Raise the printer lid.

  2. Locate the Printhead.  The Printhead is located on the same side of the printer as the waste ink tank.  

  3. Release the Print Head Carriage from the parked position by pressing the blue release lever down (shown below). There will be a slight clicking sound as the Print Head Carriage releases.

    release print carriage

  4. Release the lever and slide the Print Head Carriage to the left and away from the parked position.

    g2 unpacking 12

Leave a comment