Reasons and Solutions:
1. Not cured properly With out White Ink: 1min 30sec at 325 deg. With White Ink: 2min 30sec at 325 deg.
2. Not pre-treated properly Too much time on the heat press when setting the white ink pre-treat will cause peeling. 10 seconds at 325 deg. Too much pre-treat can also cause peeling. Cut back on the amount being sprayed.
3. Fabric is not good for ink jet printing White Ink prints well only on 100% cotton. With out White Ink many different types of fabrics can be printed. 50/50 cotton poly blends usually print good with out needing a poly pre-treatment. Synthetic fabrics need a poly pre-treatment for good prints.