Using the Large Table on the Melco G3

customerAugust 24, 2018

Tools needed for installation:

  • 2.5mm Metric Hex Driver
  • 3mm Metric Hex Driver

Needed Parts:

  • T-Shirt Table, Large
  • Four (4) M4 Countersunk Hex Screws

 

Installation Instructions

  1. Remove the Standard Frame Table from the machine.
    1. Loosen and remove the hardware – 4 screws – at each corner of the table using the 3mm Metric Hex Driver.

      standard table screws

    2. Remove the Standard Frame Table and store it in a secure location.
  2. Align the Large T-Shirt Table as shown in the picture below and secure it to the Table Support using four (4) M4 Countersunk Hex Screws.

    large table mounted

Buy parts for your Melco G3

Leave a comment