Pre-tension Adjustment

Osman Bayrak

Pre-tension Adjustment

The pre-tension adjustment is located at the top of the embroidery machine..

1. To ensure the pre-tension is adjusted properly, it is recommended that none of

the brass threads are showing

2. Notice in the diagram the two pre-tension adjustments. #1 has a couple of threads showing, while #2 does not. #2 is adjusted properly. (The pre-tension screw on the right is #1 and the left is #2).

3. If the pre-tension screws are showing brass threads, simply turn the outside of the pre-tension screw to right to tighten.


Leave a comment

Please note, comments must be approved before they are published