Embroidery Machine Repair Articles

Download this comprehensive guide on trouble shooting and repairing your embroidery machines trimming function

40 Embroidery maintenance and repair Facts 1. Clean under the needle plate once a week.2. Oil the hook every four...

This is usually caused when the sewing heads positioning finger is not centered with the sewing hook. To correct, remove...

There are about three things that cause birdnesting: Unbalanced tension, flagging, or a problem with the hook assembly. For tension...

There should be a ratio of approximately 2/3rds top thread to 1/3rd bobbin thread. This a general guideline, not an...

First look at the top side of the fabric. Are the stitches laying flat? Is there bobbin pulled up to...

Reasons and Solutions: I. The following items indicate a design problem, not a machine problem. If Thread breaks occur... a....

Damage to the Rotary Hook If there is any damage to the Rotary Hook, the thread will break on every...

A -  ANGLE Editing function to rotate the pattern in a counterclockwise direction. Angle can be programmed in 1 degree...

Bobbin Adjustment Ensure the bobbin has the proper tension by following these steps: 1. Holding the bobbin spool in your left...

Main Adjustment The Main Tension adjustment is located at the top of the embroidery machine, under the pre-tension adjustment. Please...

Reasons and Solutions There are several things to check after a hoop has been hit. 1. Check the needle. If...

There is no set schedule for changing needles. Applications for embroidery machines are very broad, making set time schedules for...

Inspect the needle, and ensure that it is inserted onto the needle bar correctly. There are two things to look...

1. Change the needle. 2. There are 3 needle plates, one is for tubular frames, one is for caps, one...