Brother GT-541 SupportBrother GT-541 Support

Replacing Control Box When the PCB's inside is replaced, use GTService Tool to readjust firmware controls. Prepare a voltmeter (tester) and a thermometer and refer to the pages concerned.   (1) Remove Power code (2) Remove Operation Panel      Remove 4 Screws at both sides. Unscrew the Print SW...

Click here to Download the Brother GT-541 operation manual Buy ink for your Brother GT-541 and GT-782

  YOU CAN DOWNLOAD THE BROTHER GT-541 Parts list HERE Buy parts for your brother GT-541 and GT-782

(3) Insert the new Ink Cartridge securely (be careful with the direction).     <Note>     Confirm the color of ink. Loading a wrong color of ink causes damage to the Print Heads. If you have installed a wrong color of ink, immediately contact Brother         ...

Learn how to prepare a Brother GT-541 direct-to-garment DTG printer for long term storage.

Learn how to perform a nozzle check on the white ink channels on the Brother GT-782 direct-to-garment DTG printer. The nozzle check feature shows if all the nozzles in the four print heads are firing properly.

Learn how to manually clean the nozzles on the bottom of the print heads on the Brother GT-541 or GT-782 printers.

Learn how to perform a nozzle check on the Brother GT-541 direct-to-garment DTG printer. The nozzle check feature shows if all the nozzles in the four print heads are firing properly.

Learn how to remove and install the inline filters on the white ink lines on the Brother GT-782 printer.

Learn how to adjust the frequency to which the Brother GT firmware is set in order to wipe the bottom of the print heads with the wiper blade.

Learn how to thoroughly clean the wiper assembly arms on the Brother GT direct-to-garment DTG printers. When performing this level of cleaning, please make sure that you cover the caps with a paper towel to prevent pieces of dry ink from going into the caps.

Learn how to remove and insert the wiper blade on the maintenance station of a Brother GT direct-to-garment DTG printer. 6-1-5. Replacing the Wiper Blade The Wiper Blade needs to be replaced if it starts to come off to solve the ink-jetting problem. Use the Wiper ASSY (SA9001001) for the...

Learn how to use the garment alignment tool for the Brother GT-541 and GT-782 printers.

Learn how to install the Brother GT-541 or GT-782 Garment Alignment Tool.

Learn how to install the Brother GT direct-to-garment print head into Brother GT-541/GT-782 printers and remove it