Pearl PTM - CHANGING PRETREAT
customer
When changing pretreat it is important to follow these steps to ensure proper function the the Pearl PTM.
The internal volume (mL) counters use these maintenance buttons to calculate the estimated usage. Incorrectly
changing the pretreatment may result in incorrect volume (mL) counting for the Pearl PTM.
1. To change the pretreat, enter the Maintenance Menu by pressing the Maintenance Menu icon.
2. Remove the inlet hose from the preatment container.
3. Place a cup under the Nozzle to collect the excess pretreat.
4. Press the Pretreatment Auto Prime Button or Manual Pretreatment Prime Button until most all the pretreatment in the hose line is clear.
5. Excess pretreatment solution can be poured back into the pretreatment container.
6. Place the inlet hose in the distilled water container.
7. Place a cup under the Nozzle to collect the distilled water.
8. Press the Water Auto Prime Button or Water Manual Prime Button to clean out remaining pretreatment
left in the hose line.
9. Remove the inlet hose from the distilled water container.
10. Press the Light/Dark Pretreatment Selection icon to switch to the desired pretreatment.
11. Press the Pretreatment Auto Prime Button or Manual Pretreatment Prime Button until most all the water
in the hose line is clear.
12. Discard the Distilled water in the cup.
11. Place the inlet hose into the other pretreatment container.
12. Place a cup under the Nozzle to collect excess pretreat.
13. Press the Pretreatment Auto Prime Button or Manual Pretreatment Prime Button to start priming.
14. Allow the pressure to build up to ensure proper priming of the machine.
15. Excess pretreatment solution can be poured back into the Pretreatment container.
