Removing the Ink Covers on the Brother GT-541

Print Friendly, PDF & Email

(1) Remove the four screws tuss (M4x6) and three washers (in the red circles shown below), and then remove the four screws pan (S/P washers) (M4x14) (shown in the red triangles below).

(2) Remove the Ink Cartridge Cover F.

Remove Ink Covers 1

(3) Remove the four screws truss (M4x6) (in the red circles shown below) from both sides of the Ink Cartridge Cover R.

(4) Remove the Ink Cartridge Cover U and the two Cover Supports on both sides of the Ink Cartridge Cover U.

Remove Ink Covers 2

(5) Remove the four screws truss (M4x6) (in the red circles shown below) from both sides of the Ink Cartridge Cover R.

(6) Remove the Ink Cartridge Shelf Plate and the two Cover Supports on both sides of the Ink Cartridge Shelf Plate.

Remove Ink Covers 3

(7) Remove the six screws truss (M4x6) (in the red circles shown below) from the Ink Cartridge Cover R.

(8) Remove the Ink Cartridge Cover R.

Remove Ink Covers 4

(9) Remove the three screws pan (S/P washers) (M4x14) (in the red circles shown below) from the Side Cover L.

Remove Ink Covers 5

Buy parts for your Brother GT-541 and GT-782