Print Friendly, PDF & Email

The Environment for the Printer.

Garment Printer maintenance

Room Temperature

Must keep printer above 61°F (16˚C) to 90°F (40˚C)

Humidity

Critical to the printer’s Operation

Must keep above 45% RH MINIMUM!

The Higher the humidity, the better.

  • Control environment using a non- condensing, non-misting humidifier 

Heat press

Must be placed far enough away as to not affect air near the printer If you can feel heat inside your printer, it’s too close.

 humidifier for Anajet garment printing

Maintenance Schedule

Daily

Nozzle Check: If your nozzle check is good, that is all you need to do for that day. If it is not follow the steps below until it is.

Print Head Clean Nozzle Check#2 (if it is good you are done, if not…)

Print Head Clean #2 Nozzle Check #3 (if it is good you are done, if not…)

Print Head Clean #3 Nozzle Check #4 (if it is good you are done, if not…)

Garment Printer maintenance

 

 

 

 

Ink Charge using the SPRINT Utility program

Nozzle Check #5 (If the nozzle checkis still bad you may have cloggingissues in the ink delivery system.)
You can buy a Anajet Sprint Print head here

Weekly

Shake white ink cartridges

Clean the Maintenance Station and edges of Print Head.