Print Friendly, PDF & Email

Anajet errors: hangs at Auto System Maintenance, displays other errors, then loops back to Auto Syst Maint again.

Anajet Auto MaintenanceJobs that require the PRINT button- such as Nozzle check, purge nozzle, or new print jobs from EKPrint Studio- the system will do a continuous loop of Print head clean and ink charge first and drain my cartridges

Then green READY light and yellow WAIT start blinking and several different error messages keep displaying on the control panel. At this point the machine hangs and there is no activity.

Answer:

Make sure that your printer queue on the computer is cleared. Sometimes it gets confused when there are multiple actions in the queue.  OR your main controller board is bad

 

anajet system maintenance